Home Products Programmable Controllers CompactLogix - Medium Systems

MVI69-104S

IEC 60870-5-104 Slave Communication Mod


IEC 60870-5-104 Ethernet Server Network Interface Module for CompactLogix


Price Per 1   £2,574.31

Routeco stock: 0
Non-Returnable Product
Please login or register for trade pricing.

Associated Products
^ denotes Non-Returnable Product.



Technical Specification
Depth87 mm
Explosion safety category for dustNone
Explosion safety category for gasNone
Height131 mm
Number of HW-interfaces industrial Ethernet0
Number of HW-interfaces other0
Number of HW-interfaces PROFINET0
Number of HW-interfaces RS-2321
Number of HW-interfaces RS-4220
Number of HW-interfaces RS-4850
Number of HW-interfaces USB0
Redundancyno
Supporting protocol for DeviceNetno
Supporting protocol for EtherNet/IPno
Supporting protocol for MODBUSno
Supporting protocol for other bus systemsyes
Supporting protocol for PROFIBUSno
Supporting protocol for TCP/IPno
Transmission rate100000 kBit/s
Width39 mm
Features and Benefits
  • The MVI69-104S module acts as an input/output module between the IEC-870-5-104 Ethernet network and the CompactLogix backplane. Data transfer between the module and the processor is asynchronous from the actions on the network. Databases are defined by the user for the module to hold data as required by the protocol.
  • The MVI69-104S module is a powerful communication interface for CompactLogix platform processors. Developed under license from Rockwell Automation, the module incorporates proprietary backplane technology that enables powerful data access to the CompactLogix processor.
  • The MVI69-104S module accepts commands from an attached master unit. A port configured as a virtual slave permits a remote master to interact with all data contained in the module. This data can be derived from the CompactLogix processor. The remote master device uses the fully-configured databases in the module to control outputs and monitor inputs. The module can operate in balanced or unbalanced mode.
  • Supports time stamp events
  • Supports time and data synchronization from a master or the processor
  • Supports monitored data
  • Event queue supports 100 points for each data type
  • Supports Master Class 1 and Class 2 polls with configurable parameters
  • Acknowledgement transmission is handled internally by the module
  • Configurable data link address (session) and common ASDU address (sector)
  • Configurable pulse duration
Resources / Data Sheets
Technical Data
User Manual
Certificate of Conformity


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.