Weigh scale module. Single channel

List Price: £2,454.47 Price Per 1 Average Lead Time: 17 days
Non-Returnable Product
Add to basket
Please enter a valid order multiple
Pricing/Availability request
Please login or register for trade pricing.     

Technical Specification
Flux controller possibleno
Height18.39 mm
Single-axis controller possibleno
Single-axis positioning possibleno
Suitable for cam controllerno
Suitable for CNCno
Suitable for countingno
Suitable for detection absolute valueno
Suitable for electronic position measuringno
Suitable for flux measurementno
Suitable for flying sawno
Suitable for incremental data detectionno
Suitable for multi-axis controlno
Suitable for multi-axis positioningno
Suitable for NCno
Suitable for path controllerno
Suitable for pressure controlno
Suitable for safety functionsno
Suitable for SSIno
Suitable for temperature controlno
Suitable for weightingyes
Suitable for welding controlno
Width17.9 mm
Features and Benefits
  • The HI 1756-WS conditions and digitizes the weight signal 110 times per second with over one million counts of resolution over a differential signal range of 0 to 15mV. It then transmits the selectable Gross, Net and/or
  • Rate-of-Change data to the processor. This high resolution allows the module to tolerate large dead loads and over sizing of the load sensors while retaining a high level of usable resolution. The module supplies 5 volts of DC
  • excitation to drive up to four 350 ohm load sensors or load cells associated with a single (-WS), or eight load cells associated with a dual (-2WS) scale. It will support additional load cells with an external power supply.
  • Hardy’s pre-programmed and pre-tested integration tools can reduce development time by 50 to 90%. Using a combination of Add-onProfiles
  • (AOPs) and SE and ME HMI Faceplates with Add-on-Instructions, creates a synergistic method for EASY and seamless integration for weighing with Rockwell Automation PLCs/PACs using RSLogix® and Studio 5000®. The HI 1756-WS supports the use of the producer/consumer technology in the ControlLogix system to transmit data. This type of communications is an intelligent data exchange in the system where the module produces data without having to be polled.
  • Two or three bi-color LEDs on the module’s front panel report functional characteristics. Being a true ControlLogix module the HI 1756- WS supports removal and insertion under power.
  • C2 enables electronic calibration of the weigh system without test weights. This saves system start-up costs and aggravation. Of course, even
  • if C2 certified load sensors are not used, the system can still be calibrated the slow, traditional way using certified test weights.
  • WAVERSAVER® eliminates the effects of unwanted plant vibration on or around the scale by permitting the weigh module to “see” through the unwanted vibration signals - as low as 0.25Hz - while yielding a stable actual reading.
  • INTEGRATED TECHNICIAN® used in conjunction with an IT Junction Box, provides built-in system diagnostics that enable you to troubleshoot and diagnose your weighing system. You can read individual load sensor voltages and weights, make comparisons, and isolate individual system components for quick and easy troubleshooting
Resources / Data Sheets
Associated Products

IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.