Home Products Power / Conditioning Surge Protection

8951560000

VSPC 1CL 24VAC R


Surge voltage arrester (data networks/MCR-technology), with warning function / function indicator, analogue, Number of signals: 1, AC, 24 V, 34 V, 450


Price Per 1   £105.13 | £99.87

Routeco stock: 0
Non-Returnable Product
Please login or register for trade pricing.

Associated Products
8951730000^
Weidmuller
 Basic element for surge protection device (data networks/MCR-technology), Base element, analogue, Number of signals: 2/4, Message function: prepared. Rated current: 300 mA.
£31.77 £30.18
Price Per 1
Add to basket
Product added to basket
Routeco Stock: 0 Pricing/Availability request

^ denotes Non-Returnable Product.



Technical Specification
Connection 1Other
Explosion-tested versionno
Frequency2.6...2.6 MHz
Limiting frequency2.6 MHz
Max. continuous voltage AC28 V
Max. continuous voltage DC40 V
Mounting methodOn basic element
Nominal discharge surge current (8/20)2.5 kA
Nominal load current0.45 A
Nominal voltage AC24...24 V
Nominal voltage DC34...34 V
Pro-active thermo-controlyes
Signalling at the deviceOptic
Voltage protection level core/earth450 V
Voltage protection level core/signal ground450 V
Voltage protection level signal ground/protective ground650 V
With remote signalling contactno
Features and Benefits
  • Analogue signal/current loop (CL) protection includes the following signals:
  • Signals from current loops (analogue measurements of sensors over long distances) 4 – 20 mA, 0 – 20 mA etc.
  • Two-wire, three-wire and four-wire, without a common reference potential
  • e.g. level indication signals from voltage sensors (analogue measurements of sensors over short distances) 0 – 10 V, PT 100 etc .; e.g. temperature measurement
  • Pluggable arrester, with interruption-free and impedance-neutral plug-in and pull-out
  • Can be tested with the V-TEST testing device
  • Version with floating-earth PE connection used to avoid differences in potential
  • Can be used in compliance with the IEC 62305 (D1, C1, C2 and C3) installation standard
  • Integrated PE foot safely discharges up to 20 kA (8/20 μs) and 2.5 kA (10/350 μs) to the PE
  • Colour coding of the voltage levels for fast identification on the panel
  • Safety function through coding elements for different voltage levels
Resources / Data Sheets
Technical Data


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.