Home Products Networks / Communications Ethernet Switches

IE-1000-4T1T-LM

IE-1000 GUI Based L2 switch


IE-1000 GUI Based L2 switch, 5 FE copper ports. The Cisco® Industrial Ethernet (IE) 1000 Series Switches are compact rugged switches aimed at Operational Technology (OT) users with limited IT network knowledge. The IE 1000 Series Switches provide an easy transformation from the legacy factory to digital solution. For machine builders and Machine-To-Machine (M2M) solutions, it is an attractive entry level product as a GUI-based, lightly-managed switch. The IE 1000 is a good fit for locations with harsh temperatures and small spaces and is Power over Ethernet (PoE) capable with zero IT management.


  POA - Contact Service Centre

Routeco stock: 0
Non-Returnable Product
Please login or register for trade pricing.

Associated Products
^ denotes Non-Returnable Product.



Technical Specification
Depth115 mm
Ethernetyes
Height127 mm
IP-ratingIP30
Layer 2yes
Layer 3no
Max. PoE power4.2 W
Mounting methodDIN rail (top hat rail)
Number of other ports5
Power over Ethernet802.3 af (PoE)
Width38 mm
Features and Benefits
  • Scalability: Four models are available supporting 5, 6, 8 and 10 Ethernet ports, with Fast Ethernet (FE) and Gigabit Ethernet (GE), copper and fiber uplinks options
  • Easy integration: Zero-touch IP discovery or Dynamic Host Configuration Protocol (DHCP)IP addressing and simple web GUI-based management
  • PnP (Plug and Play): Automates the process of provisioning the new devices in to the network by applying configurations, installing required image without manual intervention
  • Fast start-up time: Starts 30 seconds from cold boot
  • Manageability: Web GUI interface, and diagnostics and analysis options through Simple Network Management Protocol (SNMP) and syslog
  • Security: secure access; port-security; TACACS+ and RADIUS AAA Client: Security protocols to control access into networks
  • IEEE 802.1x security: Provides an authentication mechanism to devices wishing to attach to the network. Single host mode with MAC authentication bypass
  • Minimize data load: VLAN aware, Internet Group Management Protocol (IGMP) and DHCP snooping to filter unwanted data
  • Lightly-managed: Spanning-Tree Protocol (STP), Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol aware
  • Sticky-MAC: Enables the IE1K to retain MAC addresses it dynamically learns and avoid new devices to connect on the port
  • BootP server with per-port support: When client sends a BootP request, the server responds with BootP response based on same DHCP pool configuration
  • Gigabit uplink: Two fiber-optic SFP based uplink for up to 50 miles (80 kilometres) links
  • Industrial PoE: Up to eight PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models
  • Redundant voltage feeds, alarm relays support and DIN rail mount
  • Industrial environmental compliance and certifications: Ethernet/IP (CIP)
Resources / Data Sheets
Technical Data
Product Profile
Installation Instructions


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.