Home Products Networks / Communications Communication Gateways

AB9003

MODBUS TCP MASTER/CONTROL NET SLAVE


Anybus X-gateway - Modbus TCP Client - ControlNet Adapter


Price Per 1   £1,282.00

Routeco stock: 0
Non-Returnable Product
Please login or register for trade pricing.

Associated Products
^ denotes Non-Returnable Product.



Technical Specification
Depth110 mm
Front installation possibleyes
Height101 mm
IO link masterno
IP-ratingIP20
Rack-assembly possibleno
Rail mounting possibleyes
Supply voltage DC24...24 V
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNet Safetyno
Supporting protocol for DeviceNetno
Supporting protocol for EtherNet/IPno
Supporting protocol for MODBUSyes
Supporting protocol for other bus systemsyes
Supporting protocol for PROFIBUSno
Supporting protocol for PROFINET IOno
Supporting protocol for TCP/IPno
Voltage type of supply voltageDC
Wall mounting/direct mountingno
Width35 mm
Features and Benefits
  • Modbus TCP Client/Master interface
  • Modbus TCP Client and Server setup is made via an included visual web configuration interface without the need for any programming.
  • Modbus TCP Client functionality according to Modbus specification V1.1B
  • Support for Modbus TCP functions 1, 2, 3, 4, 5, 6, 15, 16, 23
  • Connects up to 64 Modbus TCP servers/slaves
  • Supports up to max 256 bytes of Input and 256 bytes of Output data
  • 10/100Mbit operation in full or half-duplex
  • Integrated FTP server provides easy file management using standard FTP clients
  • Web server with dynamic data capability and Server Side Include (SSI) capability
  • Email client with dynamic data capability and Event-triggered email handling
  • Downlink Live List providing Modbus-TCP transaction status to uplink PLC
  • Control and Status words for downlink network control/status
  • Individual Modbus TCP server port number setting
  • Byte Swap feature
  • Full Modbus address range (1-65536)
  • Dual Modbus TCP RJ-45 ports available simultaneously
  • ControlNet Adapter features
  • ControlNet Adapter settings can be made either via on-board switches, or by importing the provided .EDS file into engineering tool of the controlling PLC.
  • ControlNet CONFORMANCE TESTED™ by ODVA
  • ControlNet Specification version: Communications Adapter profile 12
  • Max. 450 bytes of Input and 450 bytes of Output data
  • ControlNet baudrate 5 Mbit/s
  • Supports Polled & Bitstrobed, I/O Change-of-state / cyclic I/O
  • Supports media redundancy
  • MacID node address setting via DIP switch
  • Network Access Port (NAP)
  • ControlNet network configuration via .EDS file
  • Can be used with RG-6 quad shielded cable
  • 2x BNC network connectors
Resources / Data Sheets
Technical Data


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.