Home Products Networks / Communications Communication Gateways

AB7008

HMS ANYBUS COMMUNICATOR

Anybus Communicator - CC-Link

Price Per 1 £582.00

Routeco stock: 0

Non-Returnable Product

Add to basket Pricing/Availability request

Please login or register for trade pricing.

Associated Products

^ denotes Non-Returnable Product.

Technical Specification

Front installation possible	yes
Height	27 mm
IO link master	no
IP-rating	IP20
Rack-assembly possible	no
Rail mounting possible	yes
Supply voltage DC	24...24 V
Supporting protocol for ASI	yes
Supporting protocol for Data-Highway	no
Supporting protocol for DeviceNet Safety	no
Supporting protocol for DeviceNet	no
Supporting protocol for EtherNet/IP	no
Supporting protocol for MODBUS	yes
Supporting protocol for other bus systems	yes
Supporting protocol for PROFIBUS	no
Supporting protocol for PROFINET IO	no
Supporting protocol for TCP/IP	no
Voltage type of supply voltage	DC
Wall mounting/direct mounting	no
Width	75 mm

Features and Benefits

Saves machine builders and device manufacturers of integrating a CC-Link interface
Allows system integrators to retro-fit older automation devices into CC-Link communication structures
Requires no hardware or software changes to be made to the connected device
Compatible with all PLCs with CC-Link support
Performs complete serial protocol conversion, no PLC function blocks required
Intelligent I/O data mapping within the Communicator permits even devices with slow serial communication can be integrated without any restrictions to the upper network
Possibility to connect upto 31 nodes via one Communicator giving inexpensive CC-Link network connectivity for your devices
Always free technical support from HMS and our global Anybus Distributors
Serial protocol configuration features
No high level programming skills are needed to set up the Anybus® Communicator as configuration is accomplished using the included, easy to use Windows™ based ACM (Anybus Configuration Manager).
Selectable RS-232/422/485 interface
Pre-defined 6-step Modbus-RTU configuration wizard
Selectable pre-loaded DF1 commands. No scripting or serial frame building required!
Ability to configure ASCII or vendor specific protocols (Request/Response or Produce/Consume via a visual frame building interface
Multi-language support for English, German, Spanish, Italian, French, Polish, Russian, Chinese and Japanese
Handy Save/Load function allows for a completed configuration to be re-used for many other installations
Password protection prevents unauthorized upload and download of configurations
Serial Line Listener and In-built Checksum calculations for diagnostic and troubleshooting
CC-Link interface features
Complete CC-Link slave Version 1 and 2 functionality
CC-Link Conformance BAP-05027-B specification
Max. 896 bits/128 words (368 bytes) of I/O data in each direction
Supports CC-Link baudrates 156 kbit/s – 10 Mbit/s
Up to 4 occupied stations
Up to 8 extension cycles (version 2 only)
CC-Link configuration via on-board switches or via .CSP file
1x 5-pin, 5.08 Phoenix plug network connector

Resources / Data Sheets

User Manual

Installation Instructions

Certificate of Conformity

IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.