Home Products Drives PowerFlex 750 Series

20G1ANC205JA0NNNNN

PF755 400V 3PH 205A 110KW IP00 EMC W DB


PowerFlex 755 AC Drive, with Embedded Ethernet/IP, Air Cooled, AC Input with Precharge, no DC Terminals, Open Type, 205 Amps, 110kW ND, 90kW HD, 400 VAC, 3 PH, Frame 6, Filtered, CM Jumper Installed, DB Transistor, Blank (No HIM)


Price Per 1   £13,765.47

Routeco stock: 1 - Available now
Please login or register for trade pricing.

Associated Products
^ denotes Non-Returnable Product.



Technical Specification
Application in domestic- and commercial area permittedyes
Depth346.4 mm
Dynamic brake chopper includedyes
Dynamic brake resistor fittedno
Height665 mm
IP-ratingIP20
Mains frequency50/60 Hz
Mains voltage380...480 V
Max. output at linear load at rated output voltage90 kW
Max. output at quadratic load at rated output voltage110 kW
Max. output frequency590 Hz
Nominal output current I2N205 A
Number of analogue inputs0
Number of analogue outputs0
Number of digital inputs1
Number of digital outputs0
Number of HW-interfaces industrial Ethernet1
Number of HW-interfaces RS-4851
Number of phases input3
Number of phases output3
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNet Safetyno
Supporting protocol for DeviceNetno
Supporting protocol for EtherNet/IPyes
Supporting protocol for MODBUSyes
Supporting protocol for other bus systemsno
Supporting protocol for SERCOSno
Supporting protocol for TCP/IPyes
Width308 mm
With control unitno
Features and Benefits
  • PowerFlex 755 AC Drives provide ease of use, application flexibility, and high performance.
  • They include multiple control and hardware options, as well as optional embedded safety features.
  • These drives are well-suited for a wide variety of motor control applications including pumps, fans, and conveyors.
  • With Integrated Motion on EtherNet/IP, you can place these drives on the same network as Kinetix drives.
  • A Dual-port EtherNet/IP Option Module supports ring, linear, and star topologies, as well as Device Level Ring (DLR) functionality for fault tolerant connectivity and high drive availability.
  • IP00/IP20 NEMA/UL Type Open, flange mount, IP54 NEMA/UL Type 12.
  • Pre-engineered Power Option Bay provides cost-effective solution for popular power options.
  • Automatic Device Configuration (ADC) allows Logix controllers to detect a replaced drive and download all configuration parameters automatically.
  • V/Hz control, vector control with FORCE™ technology, sensorless vector control, and permanent magnet motor control.
  • Integrated Motion on EtherNet/IP eases drive configuration and control by using profiles and instruction sets embedded in the Studio 5000 Logix Designer® application.
  • Predictive diagnostics for increasing the life of cooling fans and relay outputs.
  • Configuration and programming via integral LCD Human Interface Module (HIM), DriveTools SP software, or Connected Components Workbench software.
Resources / Data Sheets
Technical Data
Installation Instructions
Quick Start Guide
Selection Guide


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.