Home Products Drives PowerFlex 4/40/40P/400

22C-D030N103

AC PFLEX400, 380-480V 30A 15KW 3ph


PowerFlex 400, Fan & Pump Drive. 480 VAC, 3 PH. 30 Amps. 20 HP,Frame Size C, IP20 (Open). Fixed Keypad. RS485 (without Brake IGBT)


Price Per 1   £2,267.93

Routeco stock: 0
Please login or register for trade pricing.

Associated Products
^ denotes Non-Returnable Product.



Technical Specification
Application in domestic- and commercial area permittedyes
Depth180 mm
Dynamic brake chopper includedno
Dynamic brake resistor fittedyes
Height260 mm
IP-ratingIP20
Mains frequency50/60 Hz
Mains voltage380...480 V
Max. output at quadratic load at rated output voltage15 kW
Max. output frequency320 Hz
Nominal output current I2N30 A
Number of analogue inputs2
Number of analogue outputs1
Number of digital inputs2
Number of digital outputs2
Number of HW-interfaces RS-4851
Number of phases input3
Number of phases output3
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNet Safetyno
Supporting protocol for DeviceNetno
Supporting protocol for EtherNet/IPno
Supporting protocol for MODBUSno
Supporting protocol for other bus systemsno
Supporting protocol for SERCOSno
Supporting protocol for TCP/IPno
Width130 mm
With control unityes
Features and Benefits
  • PowerFlex 400 AC Drives are optimized for control of commercial and industrial fans and pumps.
  • Built-in features such as purge and damper input provide a cost-effective solution for speed control in a broad range of variable torque fan and pump applications.
  • NEMA/UL Type 1, 12, 3R, and 4 enclosures.
  • Flange-mount and panel-mount options.
  • V/Hz control, slip compensation, and PID control.
  • Internal RS-485, Common Industrial Protocol (CIP), embedded Modbus RTU, Metasys N2, and Apogee FLN P1-plant floor network protocols.
  • Supports Drive Serial Interface (DSI) communication modules.
  • Drive overload protection, flying start, purge and damper input, hand/off/auto, and sleep/wake features.
  • Configuration and programming via integral keypad, remote keypad, or DriveTools SP software.
Resources / Data Sheets
Technical Data
Selection Guide
Installation Instructions
Product Profile


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.