LGY112510

Linergy DS Screw Distribution Block 1P 125A 10 Holes

This Linergy DS screw distribution block can be installed on a standard DIN rail or on a mounting plate. It is designed for single-pole (1P) installations. The number of poles is 1. The total connection capacity is 10 terminals. The rated operational current (Ie) is 125 A. The rated peak withstand current (Ipk, 60 ms) is 25 kA. The rated short-time withstand current (Icw, 1 s) according to IEC/EN 60947-7-1 is 4.2 kA. The width in 9 mm pitches is 3. The terminal capacity is 2 × 9.5 mm diameter, 2 × 7.5 mm diameter, 6 × 5.8 mm diameter. The rated insulation voltage (Ui) is 500 V AC. The rated impulse withstand voltage (Uimp) is 8 kV. The rated operational voltage (Ue) is 230 V AC (Ph/N), 440 V AC (Ph/Ph). The operating frequency is 50 Hz or 60 Hz. The pollution degree is 3. The overvoltage category is III. According to IEC/EN 60947-1, the dielectric withstand voltage is 2500 V AC. The maximum conductor cross-section is 35 mm². The dimensions are (H) 85 mm × (W) 27 mm × (D) 50.5 mm. The weight is 125 g. The operating temperature range is –25 °C to +55 °C. It complies with IEC/EN 60947-7-1 and IEC/EN 61439-1 & -2 standards.