Home Producten Netwerken en Communicatie

Communication Gateways

Rockwell Automation Pricing action

Geef resultaten weer 1 - 6(of 6)
ILX56-PBM^
Prosoft
 PROFIBUS DPV1 Master/Slave for ControlLogix. The ILX56-PBM PROFIBUS DPV1 Master/Multi-Slave module allows Rockwell Automation ControlLogix processors to communicate with various PLCs and devices using the PROFIBUS DP protocol. As a PROFIBUS DP Master, the module can transfer up to 5000 bytes of cyclic I/O data with various slave devices on the network.
€2.689,00
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 0 Controleer prijs/beschikbaarheid

PLX51-DNPS^
Prosoft
 The PLX51-DNPS gateways provide intelligent routing between DNP3 (Distributed Network Protocol) and either EtherNet/IP™ or Modbus® protocols. The gateways support Ethernet and Serial communications. PLX51-DNPS gateway is the DNP3 Outstation or Slave. Allows the user to integrate DNP3 devices over a secure link into a Logix system with minimal effort. No copying or mapping of data in the Logix controller is required as the PLX51-DNPS writes directly into Logix tags. Allows users to integrate the ...
€1.139,00
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 0 Controleer prijs/beschikbaarheid

A-CANOR/B^
Prosoft
 The A-CANOR/B CANopen Router/B provides intelligent data routing between either EtherNet/IP, Modbus RTU or Modbus TCP/IP and the CANopen bus network. This allows the user to integrate CANopen devices into a Rockwell Logix platform (e.g. ControlLogix or CompactLogix) or any Modbus device with minimal effort.
€1.899,00
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 0 Controleer prijs/beschikbaarheid

A-PAL/B^
Prosoft
 The PROFIBUS PA gateway allows the user to interface PROFIBUS PA DPV0/DPV1 to either EtherNet/IP or Modbus devices. When configured as a Master, the PA Link can exchange up to 2 kilobytes of PROFIBUS PA device and status data. The PA Link has two Ethernet ports for a Linear or Ring (Device Level Ring – DLR) Ethernet topology. The Ethernet ports can also be configured for port mirroring, allowing for better fault analysis.
€3.639,00
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 0 Controleer prijs/beschikbaarheid

A-CNR^
Prosoft
 The A-CNR ControlNet Router provides an efficient method of bridging between ControlNet and Ethernet networks. The module provides intelligent routing between EtherNet/IP or Modbus TCP/IP and a ControlNet network.
€2.499,00
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 0 Controleer prijs/beschikbaarheid

A-DH485R/B^
Prosoft
 The DH485 Router provides intelligent data routing between EtherNet/IP and DH485, simplifying the migration from MicroLogix and SLC systems with DH485 communications to EtherNet/IP based ControlLogix or CompactLogix platforms. The module can be used for remote programming of a SLC5/03 controller via Ethernet.
€1.509,00
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 0 Controleer prijs/beschikbaarheid

^ betekent 'Non-Returnable Product'