ILX34-MBS485

ProSoft point I/O Modbus


Modbus Serial Module for CompactLogix L1 and Point I/O Adapters


Prijs per 1   €529,00

Voorraad bij Routeco: 0
Non-Returnable Product
Gelieve in te loggen of te registeren voor uw nettoprijs

Gerelateerde producten
1734-TB
Allen-Bradley
POINT I/O. Terminal Base. 8 Pin. Screw Clamp
€14,90
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 59 - Nu beschikbaar
Controleer prijs/beschikbaarheid

1734-TBS
Allen-Bradley
POINT I/O. Terminal Base. 8 Pin. Spring Clamp
€14,90
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 459 - Nu beschikbaar
Controleer prijs/beschikbaarheid

1734-TOP
Allen-Bradley
POINT I/O. Terminal Base. One-piece. 8 Pin. Screw Clamp
€11,50
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 41 - Nu beschikbaar
Controleer prijs/beschikbaarheid

1734-TOPS
Allen-Bradley
POINT I/O. Terminal Base. One-piece. 8 Pin. Spring Clamp
€11,50
Prijs per 1
Toevoegen
Artikel toegevoegd aan winkelwagen
Voorraad: 196 - Nu beschikbaar
Controleer prijs/beschikbaarheid

^ betekent 'Non-Returnable Product'



Technische specificatie
Front installation possibleyes
Height56 mm
IO link masterno
Rack-assembly possibleno
Rail mounting possibleyes
Supply voltage DC24...24 V
Supporting protocol for ASIno
Supporting protocol for AS-Interface Safety at Workno
Supporting protocol for CANno
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNet Safetyno
Supporting protocol for DeviceNetno
Supporting protocol for EtherNet/IPno
Supporting protocol for Foundation Fieldbusno
Supporting protocol for INTERBUSno
Supporting protocol for INTERBUS-Safetyno
Supporting protocol for KNXno
Supporting protocol for LONno
Supporting protocol for MODBUSyes
Supporting protocol for other bus systemsno
Supporting protocol for PROFIBUSno
Supporting protocol for PROFINET CBAno
Supporting protocol for PROFINET IOno
Supporting protocol for PROFIsafeno
Supporting protocol for SafetyBUS pno
Supporting protocol for SERCOSno
Supporting protocol for SUCONETno
Supporting protocol for TCP/IPno
Voltage type of supply voltageDC
Wall mounting/direct mountingno
Width12 mm
Kenmerken en voordelen
  • Add-on Instruction creates UDTs, providing logical definitions for I/O, status, and control data
  • Diagnostic data available in RSLogix 5000/Studio 5000 controller tags, allowing decisions to be made based upon node health
  • Module configuration is backed up in the CompactLogix project (ACD file)
  • The serial port can be enabled or disabled through ladder logic
  • Supports up to 1,000 words of data
  • Supports up to 30 Modbus Commands & up to 35 words per command
  • Suitable for SCADA and field device interface applications


BELANGRIJK: Houdt u er rekening mee dat alle productinformatie, bijbehorende bronnen en links naar websites van derden op onze website zijn opgesteld uitsluitend voor het verstrekken van algemene informatie. Alle informatie wordt u ter wille van uw gemak in vertrouwen verstrekt en mag uitsluitend ter informatie en voor advies worden gebruikt, in overeenstemming met onze algemene verkoopvoorwaarden. Vanwege de afhankelijkheid van gegevens van derden kunnen we niet garanderen dat de inhoud op onze sites op elk moment accuraat, compleet of actueel is. Het is aan te bevelen wanneer u niet zeker weet of een product aan al uw eisen voldoet, u altijd specialistisch advies aan Routeco medewerkers vraagt voordat u uw selectie maakt.