1790D-T8BV8B

CompactBlock LDX 16 Point Base


DeviceNet LDX. Digital Combination Base Block. 8 Universal in/8 Source out base block. Screw-clamp. 24V DC


Prix par 1   €646,74

Stock chez Routeco: 0
Veuillez-vous connecter ou vous inscrire pour le prix de gros

Produits associés
^ indique un produit non consigné.



Spécifications techniques
Depth42 mm
Front installation possibleyes
Height52 mm
IO link masterno
IP-ratingIP20
Number of digital inputs8
Number of digital outputs8
Number of HW-interfaces industrial Ethernet0
Number of HW-interfaces RS-2320
Output current0.5 A
Permitted voltage at input24...24 V
Permitted voltage at output24...24 V
Rail mounting possibleyes
Short-circuit protection, outputs availableno
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNet Safetyno
Supporting protocol for DeviceNetyes
Supporting protocol for EtherNet/IPno
Supporting protocol for MODBUSno
Supporting protocol for other bus systemsno
Supporting protocol for TCP/IPno
Type of electric plug connectionScrew connection
Type of input voltageDC
Type of output voltageDC
Wall mounting/direct mountingyes
Width104 mm
Caractéristiques et avantages
  • CompactBlock LDX I/O for DeviceNet modules are compatible with PLC,
  • SLC, SoftLogix, or Logix programmable controllers by using DeviceNet
  • scanners. All CompactBlock LDX I/O module values are accessible through
  • the data tables of the PLC or SLC programmable controller.
  • Set node addresses on the modules by using rotary switches on the base
  • module, RSNetWorx for DeviceNet software, or a similar configuration tool.
  • Set the baud rate by using a similar configuration tool. Wide breadth of I/O types can handle diverse commercial applications.
  • Units expand up to 4 digital modules for flexibility of node size (6…64 points).
  • Base modules have a built-in DeviceNet adapter.
  • – Digital base modules (24V dc, 120V ac, and relay) support up to three digital expansion modules.
  • – Analog base modules (current and voltage) support up to two digital
  • expansion modules.
  • – RTD and thermocouple base modules do not support expansion modules.
  • Universal sink and source inputs reduce the number of components to stock and allow flexibility of input types.
  • Units are compatible with a broad range of sensors that include:
  • – NEMA/IEC Type 3 compliance for dc modules.
  • – NEMA/IEC Type 1 compliance for ac modules.
  • Very compact units can fit into confined areas - 104 x 52 x 42 mm
  • (4 x 2 x 1.6 in.).
  • Selectable termination types - removable D-shell and fixed-screw termination - are available.
  • Units are easy to connect and configure by using modular EDS files.
  • Installation and configuration costs are minimized.
  • Units are ODVA conformance tested, which means there is a high level of interoperability with other DeviceNet products.
  • Resistance temperature detector (RTD) and thermocouple modules
  • support a wide range of sensors and have on-board scaling.
  • Cyclic and change-of-state messaging increases network throughput and
  • productivity.
  • Auto baud rate detection is available.
  • Units mount horizontally or vertically on a DIN rail.
  • Units are UL/cUL-listed and CE-certified.


IMPORTANT : Veuillez noter que toutes les informations sur les produits, les ressources associées et les liens vers des sites web tiers contenus dans notre site web ont été préparés dans le seul but de fournir des informations générales. Toutes les informations sont fournies de bonne foi pour votre commodité et peuvent être utilisées à des fins d'information et d'orientation uniquement et à tout moment conformément à nos conditions générales de vente. En raison de la dépendance des données de tiers, nous ne pouvons pas garantir que le contenu de nos sites est exact, complet ou à jour à un moment donné et il est recommandé, si vous n'êtes pas sûr qu'un produit réponde à toutes vos exigences, de toujours demander l'avis d'un spécialiste à votre succursale locale de Routeco avant de faire votre choix.