Home Products Networks / Communications Communication Gateways

AB7010

HMS ABC MODBUS RTU (RS-485)


Serial gateway. Modbus RTU. RS232 or RS485 selectable with DIP-switch. Supply 24V DC


Price Per 1   £535.00

Routeco stock: 0
Non-Returnable Product
Please login or register for trade pricing.

Associated Products
019570^
HMS
 USB-RS-232 configuration adapter
£84.00
Price Per 1
Add to basket
Product added to basket
Routeco Stock: 0 Pricing/Availability request

^ denotes Non-Returnable Product.



Technical Specification
Front installation possibleyes
Height27 mm
IO link masterno
IP-ratingIP20
Rack-assembly possibleno
Rail mounting possibleyes
Supply voltage DC24...24 V
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNet Safetyno
Supporting protocol for DeviceNetno
Supporting protocol for EtherNet/IPno
Supporting protocol for MODBUSyes
Supporting protocol for other bus systemsyes
Supporting protocol for PROFIBUSno
Supporting protocol for PROFINET IOno
Supporting protocol for TCP/IPno
Voltage type of supply voltageDC
Wall mounting/direct mountingno
Width75 mm
Features and Benefits
  • Saves machine builders and device manufacturers of integrating a Modbus-RTU interface
  • Can be used as a data concentrator on a Modbus network being Modbus RTU master on the serial sub-network and and a Modbus RTU slave towards the PLC side.
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLC's with Modbus RTU support
  • Performs complete serial protocol conversion, no PLC function blocks required
  • Intelligent I/O data mapping within the Communicator permits even devices with slow serial communication can be integrated without any restrictions to the upper network
  • Possibility to connect upto 31 nodes via one Communicator giving inexpensive Modbus RTU network connectivity for your devices
  • Always free technical support from HMS and our global Anybus Distributors
  • Serial protocol configuration features
  • No high level programming skills are needed to set up the Anybus® Communicator as configuration is accomplished using the included, easy to use Windows™ based ACM (Anybus Configuration Manager).
  • Selectable RS-232/422/485 interface
  • Pre-defined 6-step Modbus-RTU configuration wizard
  • Selectable pre-loaded DF1 commands. No scripting or serial frame building required!
  • Ability to configure ASCII or vendor specific protocols (Request/Response or Produce/Consume via a visual frame building interface
  • Multi-language support for English, German, Spanish, Italian, French, Polish, Russian, Chinese and Japanese
  • Handy Save/Load function allows for a completed configuration to be re-used for many other installations
  • Password protection prevents unauthorized upload and download of configurations
  • Serial Line Listener and In-built Checksum calculations for diagnostic and troubleshooting
  • Modbus RTU Slave interface features
  • Complete Modbus RTU slave functionality
  • Max 512 bytes of Input and 512 bytes of Output data
  • Coil and Register access
  • Configuration via on-board DIP switches
  • Modbus RTU baudrate 12-57,6 kbit/s
  • 1x D-sub 9 female network connector
Resources / Data Sheets
User Manual
Installation Instructions
Certificate of Conformity


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.