Home Products I/O Systems 1790 - CompactBlock I/O - Legacy I/O

1790D-T16BV0

DIGITAL INPUT MASTER

DeviceNet LDX I/O. 24VDC, 16 Universal In Base Block, Screw-clamp

Price Per 1 £543.00

Routeco stock: 0

Non-Returnable Product

Add to basket Pricing/Availability request

Please login or register for trade pricing.

Associated Products

First | PrevNext | Last

^ denotes Non-Returnable Product.

Technical Specification

Depth	42 mm
Front installation possible	yes
Height	52 mm
IO link master	no
IP-rating	IP20
Number of digital inputs	16
Number of digital outputs	0
Number of HW-interfaces industrial Ethernet	0
Number of HW-interfaces RS-232	0
Permitted voltage at input	24...24 V
Permitted voltage at output	24...24 V
Rail mounting possible	yes
Short-circuit protection, outputs available	no
Supporting protocol for Data-Highway	no
Supporting protocol for DeviceNet Safety	no
Supporting protocol for DeviceNet	yes
Supporting protocol for EtherNet/IP	no
Supporting protocol for MODBUS	no
Supporting protocol for other bus systems	no
Supporting protocol for TCP/IP	no
Type of electric plug connection	Screw-/spring clamp connection
Type of input voltage	DC
Type of output voltage	DC
Wall mounting/direct mounting	yes
Width	104 mm

Features and Benefits

CompactBlock LDX I/O for DeviceNet modules are compatible with PLC,
SLC, SoftLogix, or Logix programmable controllers by using DeviceNet
scanners. All CompactBlock LDX I/O module values are accessible through
the data tables of the PLC or SLC programmable controller.
Set node addresses on the modules by using rotary switches on the base
module, RSNetWorx for DeviceNet software, or a similar configuration tool.
Set the baud rate by using a similar configuration tool. Wide breadth of I/O types can handle diverse commercial applications.
Units expand up to 4 digital modules for flexibility of node size (6…64 points).
Base modules have a built-in DeviceNet adapter.
– Digital base modules (24V dc, 120V ac, and relay) support up to three digital expansion modules.
– Analog base modules (current and voltage) support up to two digital
expansion modules.
– RTD and thermocouple base modules do not support expansion modules.
Universal sink and source inputs reduce the number of components to stock and allow flexibility of input types.
Units are compatible with a broad range of sensors that include:
– NEMA/IEC Type 3 compliance for dc modules.
– NEMA/IEC Type 1 compliance for ac modules.
Very compact units can fit into confined areas - 104 x 52 x 42 mm
(4 x 2 x 1.6 in.).
Selectable termination types - removable D-shell and fixed-screw termination - are available.
Units are easy to connect and configure by using modular EDS files.
Installation and configuration costs are minimized.
Units are ODVA conformance tested, which means there is a high level of interoperability with other DeviceNet products.
Resistance temperature detector (RTD) and thermocouple modules
support a wide range of sensors and have on-board scaling.
Cyclic and change-of-state messaging increases network throughput and
productivity.
Auto baud rate detection is available.
Units mount horizontally or vertically on a DIN rail.
Units are UL/cUL-listed and CE-certified.

Resources / Data Sheets

Technical Data

Selection Guide

Installation Instructions

Certificate of Conformity

IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.