20F11NC015AA0NNNNN^

PowerFlex Air Cooled 753 AC Drive

PowerFlex 753 AC Drive, with Embedded I/O, Air Cooled, AC Input with DC Terminals, Open Type, 15.4 Amps, 7.5kW ND, 5.5kW HD, 400 VAC, 3 PH, Frame 2, Filtered, CM Jumper Removed, DB Transistor, Blank (No HIM)
Product.Error.Unavailable


List Price: £1,250.00 Price Per 1
Non-Returnable Product
Add to basket
Please enter a valid order multiple
Product.Error.Unavailable
Pricing/Availability request
Please login or register for trade pricing.     

Technical Specification
Application in domestic- and commercial area permittedyes
Depth2.2 mm
Dynamic brake chopper includedyes
Dynamic brake resistor fittedno
Height424.2 mm
IP-ratingIP20
Mains frequency50/60 Hz
Mains voltage380...480 V
Max. output at linear load at rated output voltage5.5 kW
Max. output at quadratic load at rated output voltage7.5 kW
Max. output frequency590 Hz
Nominal output current I2N15 A
Number of analogue inputs7
Number of analogue outputs7
Number of digital inputs21
Number of digital outputs7
Number of HW-interfaces industrial Ethernet1
Number of HW-interfaces RS-4851
Number of phases input3
Number of phases output3
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNetno
Supporting protocol for EtherNet/IPno
Supporting protocol for MODBUSno
Supporting protocol for SERCOSno
Supporting protocol for TCP/IPno
Width134.5 mm
With control unitno
Features and Benefits
  • Power ratings:
  • 200...240V: 0.37…132 kW / 0.5…200 Hp / 2.2…477 A
  • 380…480V: 0.75…250 kW / 1.0…350 Hp / 2.1…456 A
  • 600V: 1.0…300 Hp / 1.7…289 A
  • 690V: 7.5…250 kW / 12…263 A
  • IP00/IP20 NEMA/UL Type Open, flange mount, IP54 NEMA/UL Type 12
  • Dual-port EtherNet/IP™ Option Module helps you leverage EtherNet/IP networks, minimize the number of managed switches, and reduce cabling needs when using Device Level Ring (DLR) networks
  • V/Hz control, vector control with FORCE™ technology and sensorless vector control
  • Predictive diagnostics to extend the life of cooling fans and relay outputs
  • Slot-based architecture provides three option slots for feedback, safety, communications, additional I/O, or an auxiliary power supply
  • Configuration and programming via integral LCD Human Interface Module (HIM), DriveTools SP software, Connected Components Workbench software, or Studio 5000 Logix Designer® software
Associated Products


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.