Home Products Networks / Communications Interface Converters

2708339

PSI-MOS-RS485W2/FO 850 E


FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, terminal device with one FO interface (BFOC), 850 nm, for PCF/fiberglass cable (multimode)


Price Per 1   £969.60

Routeco stock: 0
Non-Returnable Product
Please login or register for trade pricing.

Associated Products
1205037^
Phoenix Contact
 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
£12.88
Price Per 1 Order Multiple (10)
Add to basket
Product added to basket
Routeco Stock: 0 Pricing/Availability request

2708465^
Phoenix Contact
£3,086.25
Price Per 1
Add to basket
Product added to basket
Routeco Stock: 0 Pricing/Availability request

2709561^
Phoenix Contact
£6.87
Price Per 1 Order Multiple (10)
Add to basket
Product added to basket
Routeco Stock: 0 Pricing/Availability request

2744429^
Phoenix Contact
 Repeater, for potential separation and range increase in RS-485 2-wire bus systems, 3-way isolation, rail-mountable
£474.81
Price Per 1
Add to basket
Product added to basket
Routeco Stock: 0 Pricing/Availability request

2744652^
Phoenix Contact
 PROFIBUS cable, Fast Connect type, up to 12 Mbps (02YSY (ST)CY 1x2x22 AWG)
£3.07
Price Per 1
Add to basket
Product added to basket
Routeco Stock: 0 Pricing/Availability request

2760623^
Phoenix Contact
£89.60
Price Per 1
Add to basket
Product added to basket
Routeco Stock: 0 Pricing/Availability request

2799364^
Phoenix Contact
£101.80
Price Per 1
Add to basket
Product added to basket
Routeco Stock: 0 Pricing/Availability request

^ denotes Non-Returnable Product.



Technical Specification
Bi-directionalyes
Connection type primary sideOther
Connection type secondary sideOther
Galvanic isolationActive
Nominal electricity consumption120 mA
Over current protectionyes
Service primary sideRS-485
Features and Benefits
  • Can be combined with the PSI copper repeater in a modular way using DIN rail connectors.
  • Connections can be plugged in using a COMBICON screw terminal block
  • Supply voltage and data signals routed through via DIN rail connectors
  • Automatic data rate detection or fixed data rate setting via DIP switches
  • High-quality electrical isolation between all interfaces (RS-485 // fiber optic ports // power supply // DIN rail connector)
  • Redundant power supply possible by means of optional system power supply unit
  • Approved for use in zone 2
  • Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
  • Integrated optical diagnostics for continuous monitoring of fiber optic paths
  • Floating switch contact for leading alarm generation in relation to critical fiber optic paths
  • Suitable for data rates up to 500 kbps
Resources / Data Sheets
Technical Data


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.